Note on Diffraction Grating and Resolving Power

  • Note
  • Things to remember

Diffraction Grating

A diffraction grating consists of a large number of equally spaced, parallel slits of the same width ruled on glass or polished metal by a diamond point. Diffraction gratings are used for producing spectra and for measuring the wavelength of light accurately. These have replaced the refraction prisms as they give sharp spectra. The number of lines ruled on the grating is very, as much 5000 lines per cm.

Suppose a section GG’ of a transmission grating as shown in the figure. A plane wave of monochromatic light of wavelength λ is incident on this grating from left, normal to the plane of the grating from left, and normal to the plane of the grating. Let d be the slit separation, also called grating element or spacing.

Consider wavelets coming from corresponding points A and B on two successive slits, and travelling at an angle Ï´ to the direction of the incident beam. The path difference AC between the wavelets is d sinÏ´ and same value comes for all pairs of wavelets from other corresponding points in these two slits and in all pairs of the slit in the grating. If this path length equals one wavelength or some integral multiple of a wavelength, then waves from all slits are in phase at the screen and superpose in direction Ï´ to produce maximum. So, for the condition of maximum

$$d\sin \theta = n \lambda , n = \pm 1, \pm 2, \dots (i) $$

In this equation, n gives the order of spectrum. When n = 0, we observe in the direction of incident waves, and the central bright maximum or zero order maximum is observed.

Resolving Power

The resolving power of an optical instrument is the ability of an instrument to produce distinctly separate images of two close objects. The ability of an instrument to produce separate distinct images of two close objects is called the resolving power of the instrument. When the central maximum of one image falls on the maximum of another image, the images are said to be just resolved. The limiting condition of resolution is known as Rayleigh’s criterion.

Resolving power of microscope

Consider a point object O illuminated by a light of wavelength λ and it is observed through a microscope. If θis the semi-vertical angle as shown in the figure, the least distance between to objects which can be distinguished is given by

$$ d = \frac {\lambda }{2\mu \sin \theta } $$

where µ is the refractive index of the medium between the object and objective lens. The term µ sin Ï´ is called the numerical aperture.

The resolving power of the microscope is the reciprocal of the minimum separation between two objects between two objects seen distinctly.

$$ \therefore \text {Resolving power of microscope} = \frac 1d = \frac {2\mu \sin \theta }{\lambda } $$

From above equation, we observe that the resolving power of microscope increases when the refractive index of the medium is increased.

Resolving Power of a Telescope

It is reciprocal of the smallest angular separation between two distinct objects whose images are separated in a telescope. The angular separation is given by

$$ d\theta = 1.22\frac {\lambda }{D} $$

where dθ is the angle subtended at the objective, λ = wavelength of light used, and D is the diameter of telescope objective. The number 1.22 appears due to the diffraction through the circular aperture of the telescope. Resolving power of telescope \( = \frac {1}{d\theta } = \frac {1}{1.22} \frac {D}{\lambda } \). So resolving power of a telescope can be increased then by increasing the diameter of the objective or decreasing the wavelength of light.

Reference

Manu Kumar Khatry, Manoj Kumar Thapa, Bhesha Raj Adhikari, Arjun Kumar Gautam, Parashu Ram Poudel. Principle of Physics. Kathmandu: Ayam publication PVT LTD, 2010.

S.K. Gautam, J.M. Pradhan. A text Book of Physics. Kathmandu: Surya Publication, 2003.

A diffraction grating consists of a large number of equally spaced, parallel slits of the same width ruled on glass or polished metal by a diamond point. 

 The ability of an instrument to produce separate distinct images of two close objects is called the resolving power of the instrument. 

Resolving power of telescope is reciprocal of the smallest angular separation between two distinct objects whose images are separated in a telescope.

.

Very Short Questions

0%

DISCUSSIONS ABOUT THIS NOTE

You must login to reply

Forum Time Replies Report
Binaya Raj Koirala

I am unable to understand the paragraph of diffraction grating . Please make the language more simpler..


You must login to reply