Subject: Physics

It states that the algebraic sum of currents at a junction of an electric circuit is zero. That is,

$$ \sum I = 0 \dots (i) $$

Assuming that the current flowing towards the junction as positive and that moving away from the junction as negative, then applying Kirchhoff’s first law at the junction P, we have

\begin{align*} (+I_1) + (+I_2) + (-I_3) &= 0 \\ \text {or,} I_1 + I_2 – I_3 &= 0 \\ \text {or,} \: I_1 + I_2 &= I_3 \dots (ii) \\ \end{align*}

Hence, the sum of currents flowing towards the junction is equal the sum of currents flowing out of the junction. This law is known as Kirchhoff’s current law.

It states that in a closed loop of an electric circuit, the algebraic sum of emfs is equal to the algebraic sum of products of currents and the resistance in the various parts of the loop. Symbolically,

$$\sum E = \sum IR$$

A complex electric circuit is shown in figure. To find the current in various parts of circuit, Kirchhoff’s law can be used. Consider that the direction of emf and current flow in anticlockwise direction is taken as positive and that in clockwise direction as negative. Then applying Kirchhoff’s second law in closed loop ABCFA, we have

\begin{align*} \sum E = \sum IR \\ \text {or,} \: (+E_1) + (-E_2) &= (+I_1)R_1 + (-I_2)R_2 \\ \text {or,} \: E_1 – E_2 &= I_1R_1 – I_2R_2 \\ \text {Similarly, in the closed loop FCDEF, we have} \\ \sum E = \sum IR \\ \text {or,} \: (+E_2) + (-E_3) &= (+I_2)R_2 + (-I_3)R_3 \\ \text {or} \: E_2 – E_3 &= I_2R_2 – I_3R_3 \\ \text {At the junction F, applying Kirchhoff’s first law, we have} \\ \sum I &= 0 \\ \text {or,} \: (+I_1) + (+I_2) + (-I_3) &= 0 \\ \text {or,}\: I_1 + I_2 &= I_3 \\\end{align*}

Solving these equations, we can calculate the currents I_{1}, I_{2} and I_{3}.

Wheatstone Bridge is an electrical circuit, which is used for the accurate measurement of the resistance of a conductor.

In figure P, Q and R are known three resistors and X is unknown resistance. A cell E is connected across two junctions A and C and a galvanometer G between the junctions B and D. adjusting P and Q is known values, R is varied such that the current through the galvanometer is zero. So, the galvanometer shows null deflection and at this condition,

$$\frac PQ = \frac XR $$

This is called the balance condition of Wheatstone bridge. At such condition, junction B and D are at the same potential.

Suppose that the circuit was not in balanced condition initially, and the current passing through P and Q be I_{1} and I_{3}, and that through X and R as I_{2} and I_{4} respectively.

In the closed loop ADBA, applying Kirchhoff’s voltage law with the sign convention, we have

\begin{align*} \sum E &= \sum IR \\ \text{or,} \: 0 &= (+I_2)X + (-I_g)R_g + (-I_1)P \\ \text {or,} \: I_1P + I_gR_g &= I_2X \dots (i) \\ \text {Similarly, in the closed loop BDCB, we have} \\ \text{or,} \: 0 &= (-I_3)Q + (I_g)R_g + (+I_4)R \\ \text {or,} \: I_3Q &= I_gR_g + I_4R \dots (ii) \\ \text {At the junction B, applying the Kirchhoff’s junction law,} \\ \sum I &= 0 \\ \text {or,} \: (+I_1) + (-I_g) + (-I_3) &= 0 \\ \text {or,} \: I_1 &= I_g + I_3 \\ \dots (iii) \\ \text {and at the junction D,} \\ \sum I &= 0 \\\text {or,}\: (+I_2) + (+I_g) + (-I_4) &= 0 \\ \text {or,} \: I_2 + I_g &= I_4 \dots (iv) \\ \end{align*}

\begin{align*} \text { At the balanced condition,} \\ \text {P, Q and R are so adjusted that no current passes through the galvanometer.} \\ \text {That is,} \: I_g = 0.\\ \text {At this condition, above equations change to the following forms:} \\ I_p + 0 \times R_g &= I_2X \\ \text {or,} \: I_1P &= I_2 X \\ \text {and} \: I_3Q &= 0 \times R_g + I_4R \\ \text {or,} \: I_3Q &= I_4 R \dots (vi) \\ \text {Similarly,} \: I_1 &= 0 + I_3 \\ \text {or,} \: I_1 &= I_3 \dots (vii) \\ \text {and} \: I_2 + 0 &= I_4 \\ \text {or,} \: I_2 &= I_4 \dots (viii) \\ \end{align*}

\begin{align*} \text {Dividing equation} \: (v) \: \text {by equation} \: (vi), \: \text {we get} \\ \frac {I_1P}{I_3Q} &= \frac {I_2X}{I_4R} \dots (ix) \\ \text {Substituting the values of the current from equations} \: (vii) \: \text {and} \: (viii), \: \text {we get} \\ \frac {I_3P}{I_3Q} &= \frac {I_4X}{I_4R} \\ \text {or,} \: \frac PQ &= \frac XR \\ \text {So, the balanced condition of Wheatstone bridge is obtained.} \\ \end{align*}

reference

Manu Kumar Khatry, Manoj Kumar Thapa,et al. *Principle of Physics*. Kathmandu: Ayam publication PVT LTD, 2010.

S.K. Gautam, J.M. Pradhan. *A text Book of Physics*. Kathmandu: Surya Publication, 2003.

Kirchoff's first law states that the algebraic sum of currents at a junction of an electric circuit is zero.

Kirchoff's second law states that in a closed loop of an electric circuit, the algebraic sum of emf is equal to the algebraic sum of products of currents and the resistance in the various parts of the loop.

Wheatstone Bridge is an electrical circuit, which is used for the accurate measurement of the resistance of a conductor.

- It includes every relationship which established among the people.
- There can be more than one community in a society. Community smaller than society.
- It is a network of social relationships which cannot see or touched.
- common interests and common objectives are not necessary for society.

© 2019-20 Kullabs. All Rights Reserved.